TXT
묘사:
Nonmetallic Special Shaped Secti
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Hollow core, cushion seal
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
45.0 shore durometer a and 55.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
1200 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-40.0 degrees celsius and 100.0 degrees celsius
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.290 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Corrosion resistant and oil resistant and tear resistant and low temperature and heat dry and weather resistant
Inside Radius:
0.090 inches
Base Flange Thickness:
Between 0.040 inches and 0.050 inches
MRC:
A measurement taken at right angles to the length of a base flange,in distinction from thickness.AJGQ
Base Flange Width:
0.270 inches
First Slot/groove Depth:
0.225 inches
MRC:
A measurement of a straight line drawn from the center of a circle to any part of its circumference.AJGW
Outside Radius:
0.135 inches
First Slot/groove Width:
Between 0.040 inches and 0.050 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81343-ams 3208 professional/industrial association standard
