부품 정보
Shaft is unthreaded with close tolerances to be pressed into place, free running and smooth to hand feel. Integrally sheelded
TXT
묘사:
Needle Bearing Cam Follower
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.8870 inches and 0.9230 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
Between 0.4995 inches and 0.5000 inches
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Grease
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Rf-4c acft
MRC:
The length of a straight line which passes through the center of a stud,and terminates at the circumference.AGRJ
Stud Diameter:
Between 0.1895 inches and 0.1900 inches
Outer Ring Width:
Between 0.2760 inches and 0.2810 inches
MRC:
A measurement of the longest dimension of the stud,in distinction from width.AGXF
Stud Length:
Between 0.6050 inches and 0.6250 inches
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.LMDC
Lubrication Material Specification:
Mil-g-23827 military specification single material response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 420 washer
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 440c outer ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 440c roller
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp e52100 stud
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium shaft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cam follower
