MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
3.500 inches
MRC:
A measurement between specified points on the recess,in distinction from height.ABMH
Recess Depth:
0.125 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.250 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
5.750 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.177 inches all holes
MRC:
The number of mounting holes provided.ABTJ
Mounting Hole Quantity:
7
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Unthreaded
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
Between 1.500 inches and 1.750 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 2.000 inches and 2.500 inches
MRC:
A measurement of the longest dimension of a recess,in distinction from width.ADWC
Recess Length:
2.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Air combat maneuvering instrumentation (acmi); p4rc
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
2 rows of 3, above and below aperture and 1 to the right of aperture
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Aperture
MRC:
A measurement taken at right angles to the length of a recess,in distinction from thickness.CDDG
Recess Width:
1.500 inches
MRC:
The physical configuration of the aperture.CKSX
Aperture Shape:
Rectangular
MRC:
A measurement of the distance from the centerline to the axis of the aperture corner.CKSY
Aperture Corner Radius:
0.250 inches
MRC:
Indicates the type of aperture provided.CKTB
Aperture Type:
Recessed
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Kincludes (4) insert, cres 8-32, 0.164l centered 0.330 inch from top and bottom edges and 0.187 & 5.187 from left edge; right edge is chamfered 0.125 x 0.125; aperture starts on left edge, 0.750 from bottom edge
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11 federal specification single material response
MRC:
The physical configuration of the item.SHPE
Shape:
Rectangular
