부품 정보
Honeycomb; stationary inner-outer
TXT
묘사:
Aircraft Gas Turbi Metallic Seal
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.570 inches and 0.590 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 19.120 inches and 19.140 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.170 inches and 0.190 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F110-ge-100 aircraft eng
MRC:
Indicates the design type of the item.APGF
Design Type:
Axial compressor
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Abmz and abpx and abhp and czbj
MRC:
Indicates the location of the item on the engine section.CZBJ
Engine Section Location:
High pressure turbine
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Chromium alloy and cobalt alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5536 assn standard single material response
