TXT
묘사:
Nonmetallic Channel
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Open channel
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
45.0 shore durometer a and 55.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
1000 pounds per square inch
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-130.0 degrees fahrenheit and 400.0 degrees fahrenheit
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.312 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.250 inches
Right Side Flange Height:
0.250 inches
Left Side Flange Thickness:
0.062 inches
Right Side Flange Thickness:
0.062 inches
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Low temperature and heat dry
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
4920-01-087-3438 test set, radar altimeter
Base Flange Thickness:
0.062 inches
MRC:
The style designation corresponding to the shape of the left-side flange tip.BHQU
Left-side Flange Tip Style:
Left square end
MRC:
The style designation corresponding to the shape of the right-side flange tip.CZLZ
Right-side Flange Tip Style:
Right square end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 3345 national specification single material response
