TXT
묘사:
Rigid Shaft Coupling
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.156 inches
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.4617 inches second end and 0.4667 inches second end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.5417 inches second end and 0.5507 inches second end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.875 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
12 second end
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.621 inches first end and 0.623 inches first end
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
0.875 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
0.750 inches first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined second end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight first end
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.000 second end
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.125 inches second end
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute second end
MRC:
The means by which the item is secured.BSNP
Securing Method:
Unthreaded hole
MRC:
The number of unthreaded holes provided.BSNS
Unthreaded Hole Quantity:
2
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Steel comp 303
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-7720, comp 303 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain sleeve
