TXT
묘사:
Electrical Binding Post
MRC:
The distance measured in a straight line from the bottom to the top of an item.AAJT
Overall Height:
2.188 inches
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.AAJW
Overall Diameter:
0.438 inches
MRC:
Distance from surface plane of mounting to top of item.AAKA
Maximum Height Above Mounting Surface:
1.125 inches
Wire Hole Diameter:
0.098 inches single end
MRC:
The feature consisting of sleeves,covering,caps,mounting bushings and the like,used to electrically insulate an item.AALV
Electrical Insulation Feature:
Uninsulated caps with uninsulated studs
MRC:
The style designation indicating the configuration that most nearly corresponds to the mounting method of the item.AALX
Mounting Method Style:
Shouldered stud
MRC:
The length of a straight line which passes through the center of the threaded mounting,and terminates at the circumference.AAMP
Mounting Thread Diameter:
0.138 inches
Major Bushing Diameter:
0.125 inches
Major Bushing Length:
0.125 inches
MRC:
The electrical potential which will cause a disruptive discharge over a dry insulator,expressed in volts.AAPA
Dry Flashover Voltage Rating In Volts:
1000.0
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.ABET
Thread Length:
0.938 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the basic appearance of the item.AGTA
Basic Shape Style:
Single post, round (post binding)
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of specific diameters of a threaded mounting.ATGD
Mounting Thread Series:
Unc
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Mounting hardware
MRC:
Indicates the type of connector or conductor accommodation included on the item.CSFJ
Conductor Accommodation Type:
Screw cap w/hole single end
Cap Outside Diameter:
0.438 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy except insulation
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Nickel except insulation single layer
