MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
USED-ON-CHE-CKVA
Second Leg Width:
Between 1.940 inches and 2.060 inches
First Leg Hole Diameter:
Between 0.750 inches and 0.870 inches
First Leg Width:
Between 1.940 inches and 2.060 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.940 inches and 1.060 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
Extended flat
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
One hole
MRC:
An indication of whether or not the second leg is identical to the first leg.CSSP
Second Leg Relationship To First Leg:
Not identical
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1020
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi-1020 assn standard single material response
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features (non-core):
Second end is at a 23 degree angle, 1.12 inches long, & has a tube attached by welding; the tube has a 0.125 to 0.130 internal keyway along the length and two holes, 1 inch apart, 0.203 diameter through 1 side, 0.250-20 unc; tube outer diameter is 1.00; inner diameter is 0.628 to 0.630, and 0.685 to 0.695 at keyway; both legs are 0.250 inches thick
