MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Portable
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
18.375 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
7.000 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
16.750 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
50.0 hertz and 60.0 hertz and 400.0 hertz
MRC:
The range of complete cyclic changes,per unit of time,for which an item is rated.AFGQ
Frequency Range Rating:
+0.050/+80.000 megahertz
MRC:
The range of complete cyclic changes,per unit of time,for which an item is rated.AFGQ
Frequency Range Rating:
+0.050 to 80.000 megahertz
MRC:
An indication of whether or not a facility/ies/ to accommodate a battery/ies/ is included.ALSF
Internal Battery Accommodation:
Not included
MRC:
The total opposition (resistive and reactive) presented by the item to an alternating current load.AMNE
Output Impedance Rating:
50.0 ohms
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
Between 115.0 volts and 220.0 volts
MRC:
The number of specified ranges of frequencies or wavelengths operating between two stated limits.ANLC
Frequency Band Quantity:
7
MRC:
Indicates the type of modulation provided.AYYE
Modulation Type:
Am
MRC:
An indication of whether or not a crystal controlled feature is provided.BHFY
Crystal Controlled Feature:
Not provided
MRC:
An indication of the maximum signal output transmitted by the item.BHGB
Maximum Signal Output:
0.1 uv to 3 volts rms into 50 ohms in 10 db steps plus continous vernier
MRC:
An indication of the signal output constancy.BHGC
Signal Output Constancy:
Better than porm 1.0 db at any frequency
MRC:
Indicates the location of the modulator on the item.BHGD
Modulator Location:
Any acceptable
MRC:
The number of complete cyclic changes,per unit of time,for which the modulation is rated.BHQD
Modulated Frequency Rating:
Between 0.400 kilohertz and 1.000 kilohertz
MRC:
An indication of the degree of modulation provided.BHQG
Modulation Degree:
Between 0.0 percent and 95.0 percent and 0.0 percent and 30.0 percent
MRC:
The number of alternating current phases.FAAZ
Phase:
Single or two
