TXT
묘사:
Propeller Shaft With Universal J
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
Err-070 and err-070
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Err-070
MRC:
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.ABWV
Shaft Diameter:
1.500 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
3990-01-307-7676 pls flatrack; 2320-01-304-2277 and 2320-01-304-2278 pls (palletized loading system)
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the flange.AGMD
Flange Style:
Err-070
MRC:
The measured distance from the universal joint spider centerline to the flange outer face.AMBL
Length From Universal Joint Spider Centerline To Flange Outer Face:
Err-070
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the universal joint.BTBT
Universal Joint Style:
C7
MRC:
Indicates the type and location of the end component(s).BTBX
End Component Type And Location:
Universal joint both ends
MRC:
Indicates the type of connection end(s) on the universal joint.BTCC
Universal Joint Connection End Type:
Err-070
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
0.750 in.Slip distance; 7.560 in.Collapsed lg, 8.310 in.Extended lg
