부품 번호:
90l075ka1nn80s3s1c00gba202024
부품 정보
Axial piston variable displacement series 90 pump
TXT
묘사:
Axial Pistons Pump
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Frame
MRC:
Indicates the type of intake connection included on the item.AAYU
Intake Connection Type:
Round flange
MRC:
The type of service with which the item is designed to be used.ACKL
Media For Which Designed:
Hydraulic fluid
MRC:
Indicates the type of pumping element included on the item.AENG
Pumping Element Type:
Piston
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Uss frank cable
MRC:
The speed of the item required to produce its rated capacity.AHYZ
Operating Speed At Rated Capacity:
3600.0 revolutions per minute
MRC:
The position in which the pumping element/s/ is designed to operate.AHZA
Pumping Element Operating Position:
Horizontal
MRC:
The direction in which the pump shaft turns during operation.AHZD
Pump Rotation Direction:
Clockwise and counterclockwise
MRC:
Indicates the type of reciprocating movement within the item.AHZN
Reciprocating Stroke Type:
Variable
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Productor series: series 90, closed circuit. Type and rotation: pump, left hand. Displacement: 75 cc/rev (4.57 in cubed/rev). Control: electrical displacement with ms connector. Pressure regulation: pressure limiter (pl) in port a and b below 450 bar. Auxiliary mounting pad: none (standard). Twin end cap ports (sae j518c code 62). Filtration: suction. Displacement limitation: no limiters (standard). Shaft configuration: 14t 12/24 pitch. Charging system: 14cc/rev (.88 cubic inch/rev). Control orifice: no orifice. Special hardware features: standard valve plate 180 cc. High pressure setting for port a: 200 bar (2901 psi). High pressure setting for portb: 200 bar (2901 psi). Charge pres sure setting: 24.133 bar (350 psi) (standard).
