부품 정보
There under cut on bottom left hand side 1.156 inches in length by 0.234 inch in width
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.144 inches and 0.147 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
1.421 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
2.593 inches
MRC:
A measurement of a straight line from the midpoint of a rounded corner to its periphery.ADNU
Corner Radius:
0.062 inches
Distance Between Holes Along Length:
2.000 inches
Distance Between Holes Along Width:
1.171 inches
Distance From First Hole Centerline To End Along Length:
0.187 inches
Distance From First Hole Centerline To End Along Width:
0.125 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.051 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Special
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 5052
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/8 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-c-5541 military specification single treatment response
