TXT
묘사:
Nonmetallic Special Shaped Seal
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
P shape
MRC:
The process used in manufacturing the item.AARN
Fabrication Method:
Solid
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 69.015 inches and 69.047 inches
MRC:
The means used to attach the item.ABSX
Attachment Method:
Slot
MRC:
The number of attachment features included.ADTL
Attachment Feature Quantity:
18
MRC:
A measurement of the longest dimension of an attachment feature,in distinction from width.ADTN
Attachment Feature Length:
0.359 inches
MRC:
A measurement taken at right angles to the length of an attachment feature.ADTP
Attachment Feature Width:
0.312 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.046 inches and 0.078 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 0.172 inches and 0.204 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
Between 0.609 inches and 0.641 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Solid
MRC:
The center to center distance between an attachment feature and the adjacent attachment feature along the length.CTQQ
Attachment Feature Center To Center Distance Along Length:
3.584 inches
MRC:
The center to center distance between an attachment feature and the adjacent attachment feature along the width.CTQR
Attachment Feature Center To Center Distance Along Width:
3.584 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber isobutylene-isoprene class iir or rubber butadiene-styrene class sbr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm d2000 4aa715ac2f2 assn standard all material responses
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Strip
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
18876-9056293 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
