부품 정보
Furnished with one nut, plain, blind rivet
MRC:
The process used in manufacturing the item.AARN
Fabrication Method (non-core):
Stamped
MRC:
A measurement of the longest dimension of the first leg, in distinction from width.ADLK
First Leg Length:
Between 1.547 inches and 1.578 inches
MRC:
A measurement of the longest dimension of the second leg, in distinction from width.ADLL
Second Leg Length:
Between 0.672 inches and 0.703 inches
MRC:
The means provided to add strength and/or protection to the item.AFPW
Reinforcement Method (non-core):
Gusset both sides
Second Leg Width:
Between 0.615 inches and 0.625 inches
First Leg Hole Diameter:
Between 0.189 inches and 0.199 inches
Second Leg Hole Diameter:
Between 0.199 inches and 0.209 inches
Second Leg Distance From Edge To Hole Center Along Width:
Between 0.305 inches and 0.315 inches
Second Leg Distance From Edge To Hole Center Along Length:
Between 0.305 inches and 0.315 inches
MRC:
A measurement of the smallest dimension of the first leg,in distinction from length or width.AHPW
First Leg Thickness:
Between 0.059 inches and 0.069 inches
MRC:
A measurement of the smallest dimension of the second leg,in distinction from length or width.AHPX
Second Leg Thickness:
Between 0.059 inches and 0.069 inches
First Leg Width:
Between 0.615 inches and 0.625 inches
First Leg Distance Between Hole Centers Along Length:
Between 0.495 inches and 0.505 inches
First Leg Distance From Edge To Hole Center Along Width:
Between 0.305 inches and 0.315 inches
First Leg Distance From Edge To Hole Center Along Length:
Between 0.305 inches and 0.315 inches
First Leg End Radius:
Between 0.375 inches and 0.385 inches
Second Leg End Radius:
Between 0.375 inches and 0.385 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first leg.AJZU
First Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the first leg holes.AKAU
First Leg Hole Arrangement Style:
Two holes
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second leg.AKBU
Second Leg Style:
End radius
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the second leg holes.AKCU
Second Leg Hole Arrangement Style:
One hole
First Leg Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/5 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Angle
