부품 정보
Fuel flow transmitter
TXT
묘사:
Rate Of Flow Transmitter
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.300 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
4.530 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.050 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Aircraft; airbus a330, a340
MRC:
The minimum and maximum limits of measurement indicated by the item.BGNL
Measurement Range:
+400.0/+33000.0 pounds per hour
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Transmitter is aluminum body with cylindrical bore; a turbine driver, flow straightener and measurement assembly are put on a shaft and installed in the bore; for use in aircraft flow measuring systems; operates with a fuel flow indicator to show rate of fuel flow, total fuel used, or both; no external power is necessary for the transmitter; component maintenance manual 73-35-36 pages 1 and 2 feb 15/02 figure 1; supplied mounting is a flat surface i a rectangular electronics compartment on the transmitter for 2 magneticv pickoff coils and a skew (swirl) rudder; electrical connector receptacle keyway is on outside of electronics compartment and a cover fits on the electronics compartment
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Fuel compatibility jet a, jp-4 jp-5 mil-f-5624h
