부품 번호 89-51644

Electronic Shielding Gasket

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 51.04 and 68.904 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
89-51644
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
014947202

부품 정보
Cmaterial: consil-a compound no.895; elastomer binder: silicone; conductive filler: silver plated aluminum particles; specific gravity: 2.0 plus or minus 13% in accordance with astm d-792; volume resistance (max): .008 ohm-cm; hardness (shore a): 65 plus or minus 7 in accordance with astm d-2240; tensil strength (min)200 psi in accordance with astm d-412; elongation to break (min/max): 100%/300% in accordance with astm d-412; tear strength (min)30 ppi in accordance with astm d-624; recommended compression: 100 psi with deflection of 6% of original gasket height; emi shielding performance tested in accordance with mil-g-83528, paragraph 4.6.12.H-field 100 khz/75 db, e-field 10mhz/120db, plane 1 ghz/110db, wave 10ghz/100db

NSN
국가 주식 번호:
5999-01-494-7202 5999014947202
TXT
묘사:
Electronic Shielding Gasket
INC
INC
아이템 이름 코드:
20281
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.351 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-55.0 degrees celsius and 160.0 degrees celsius
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
1.062 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.030 inches
MRC:
The length of a straight line which passes through the center of the center hole,and terminates at the circumference.ADYT
Center Hole Diameter:
1.260 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
7010-01-391-0168
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter:
0.156 inches
MRC:
A characteristic of light that can be specified in terms of luminance,dominant wavelength,and purity.HUES
Color:
Blue
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
01365-97008a8061-7 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

{lang[cimilar]} Electronic Shielding Gaskets

« Miscellaneous Electrical and Electronic Components {lang[catalog]}
지금 비교»
맑다 | 숨기다