TXT
묘사:
Waveguide Assembly
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Internal, rectangular external, rectangular
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Gp a combat talon ii
MRC:
Indicates the type of twist as characterized by the method or manner by which the rotation of the cross-sectional axes of the tubing is affected.AHRW
Tubing Twist Type:
Step twist single tubing segment
MRC:
The angle to which a rigid tubing has been intentionally rotated during manufacture or the maximum angle to which a twistable type tubing may be rotated,as measured in degrees of angular difference between the plane of a specific transverse dimension at one extremity of the tubing and the plane of the same dimension at the other extremity.AHRX
Tubing Twist Angle In Deg:
90.0 single tubing segment
MRC:
The number of flanges provided with the item.AHSF
Flange Quantity:
2
MRC:
The ratio of the maximum to the minimum amplitude of pressure /voltage/ measured along the path of the waves.AHTW
Voltage Standing Wave Ratio:
1.21
MRC:
The difference in the amount of energy available before and after the insertion of an apparatus in a transmission system,expressed in decibels.AHTX
Insertion Loss In Decibels:
0.70
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
25.0 pounds per square inch gage
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Spcl
Waveguide Length:
52.530 inches
Waveguide Center To Center Distance:
19.720 inches
MRC:
Flexible,capable of being bent,turned or twisted,within limits,without breaking,or rigid,resisting change of form,inflexible.FLEX
Flexibility:
Rigid single tubing segment
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy single tubing segment and flange
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Lacquer all tubing segment and flange outside surfaces
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Application shown on drwg. 05395 7406-67200
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Offset bend type
