MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square (round corners)
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Indented flat keyway
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
25.130 inches
MRC:
The distance from one flat to the opposite flat of the first end.ACKY
First End Width Across Flats:
Between 0.550 inches and 0.560 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.8800 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
Between 0.1880 inches and 0.1900 inches
Second End External Keyway Length:
Between 1.000 inches and 1.010 inches
MRC:
A measurement between specified points of the keyway at the second end.AMFT
Second End Keyway Depth:
0.112 inches
Second End Distance From Keyway Center To End:
Between 0.780 inches and 0.785 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 0.7470 inches and 0.7490 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
5
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
Between 1.185 inches and 1.187 inches
First End Step Length:
1.870 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy 400
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-281, class a federal specification single material response
