MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Two indented flat keyways
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Two indented flat keyways
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
14.250 inches
MRC:
A measurement taken at right angles to the length of the keyway at the first end,in distinction from thickness.AMCZ
First End Keyway Width:
Between 0.7500 inches and 0.7520 inches
First End External Keyway Length:
3.505 inches
MRC:
A measurement between specified points of the keyway at the first end.AMDG
First End Keyway Depth:
Between 0.423 inches and 0.428 inches
First End Distance From Keyway Center To End:
2.372 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
Between 2.9930 inches and 3.0000 inches
First End Angle Between Keyways:
180.0 degrees
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
Between 0.7500 inches and 0.7520 inches
Second End External Keyway Length:
3.505 inches
MRC:
A measurement between specified points of the keyway at the second end.AMFT
Second End Keyway Depth:
Between 0.423 inches and 0.428 inches
Second End Distance From Keyway Center To End:
4.117 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
Between 3.1120 inches and 3.1140 inches
Second End Angle Between Keyways:
180.0 degrees
MRC:
The number of steps provided.ATPC
Step Quantity:
3
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
3.620 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-286, class a federal specification single material response
