TXT
묘사:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
Under Head Length:
Between 1.750 inches and 1.775 inches
First Step Diameter:
Between 0.873 inches and 0.874 inches
First Step Length:
Between 0.875 inches and 0.880 inches
Second Step Diameter:
Between 0.685 inches and 0.686 inches
Second Step Length:
Between 0.875 inches and 0.895 inches
First End Taper Length:
Between 0.120 inches and 0.130 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
40.0 rockwell c and 46.0 rockwell c
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
Between 0.990 inches and 0.995 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Abps and abpr and abpt
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.113 inches and 0.148 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
