부품 정보
Large end countersunk 3/64 inch by 45 degrees
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
Between 0.758 inches and 0.760 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.995 inches and 1.005 inches
MRC:
The length of a straight line which passes through the center of the large end,and terminates at the outside circumference.AHMG
Large End Outside Diameter:
Between 1.228 inches and 1.233 inches
MRC:
A measurement taken at right angles to the length of the split,in distinction from thickness.BXBS
Split Width:
0.2812 inches
MRC:
A measurement of the longest dimension of the tapered portion,in distinction from width.BXBT
Tapered Portion Length:
Between 0.995 inches and 1.005 inches
MRC:
The included angle of the taper.BXBW
Taper Included Angle:
Between 20 degrees 23 minutes and 21 degrees 23 minutes
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1018 or steel comp 1020 or steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-633, fsc1018, fsc1020, fsc1117 or fsc1120 federal specification all material responses
