부품 정보
Sleeve undercut 0.095 in. Min, 0.105 in. Maximum w, 0.012 in. Min, 0.016 in. Maximum deep adjacent to flange
TXT
묘사:
Tube Fitting Clinch Sleeve
MRC:
Indicates whether or not a ferrous alloy object has been subjected to a process whereby the outer portion is made substantially harder than the inner portion or core.AASG
Casehardening Indicator:
Casehardened
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.333 inches and 0.339 inches
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
40.0 rockwell c and 45.0 rockwell c
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
Between 0.096 inches and 0.102 inches
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the outside circumference.AHTC
Flange Outside Diameter:
Between 0.370 inches and 0.380 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJFY
Seat Angle In Deg:
40.0
MRC:
The length of a straight line which passes through the center of the sleeve,with terminated points on the outside circumference.ARYW
Sleeve Outside Diameter:
Between 0.334 inches and 0.338 inches
MRC:
The length of a straight line which passes through the center of the hose or tube for which the item is designed,and terminates at the outside circumference.CPMS
Hose/tube Outside Diameter For Which Designed:
0.250 inches
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel, ams 5643
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flareless
