부품 정보
4 holes 3.050 in. From right side0.161 dia. Each, 2.200 equally spaced, cross sectional shape in 4 places 0.12in. High, 0.12 outside radius in 8 places, inside width 0.350 in.0.410 in. 0.030 thick
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.156 inches and 0.166 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
Between 7.615 inches and 7.625 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, rounded corners, multi holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
Between 17.945 inches and 17.955 inches
Hole Quantity Along Length:
16
Hole Quantity Along Width:
9
Distance Between Holes Along Length:
Between 1.995 inches and 2.005 inches
Distance Between Holes Along Width:
Between 2.195 inches and 2.205 inches
Distance From First Hole Centerline To End Along Length:
Between 1.495 inches and 1.505 inches
Distance From First Hole Centerline To End Along Width:
Between 0.295 inches and 0.315 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
Between 0.150 inches and 0.160 inches
MRC:
Indicates the type of device used to fasten the item.ADQB
Securing Device Type:
Threaded fastener
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-a-250/11, t6 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
