부품 정보
Ssb phase noise less than -130dbc/hz; output level -143.5 to +13dbm; reverse power protection 50 watts; am accuracy less than porm (2% + 6% of setting); fm accuracy less than porm 5% ofsetting; ieee-488 interface bus standard; 100 nonvolitale registers to save front panel settings; power requirement 175 va max
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Bench
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
20.500 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
5.250 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
16.750 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
Between 48.0 hertz and 440.0 hertz
MRC:
The range of complete cyclic changes,per unit of time,for which an item is rated.AFGQ
Frequency Range Rating:
+0.100/+1040.000 megahertz
MRC:
The number of parts supplied with the item which may be required for application.AFHS
Accessory Component Quantity:
1
MRC:
The specific number used to identify the accessory.AKVZ
Accessory Identifying Number:
R/n 5061-9689 part no.
MRC:
Indicates the designed use of the item.ALCD
Usage Design:
100khz to 1040mhz synthesized signal generator, provides accurate output levels to porm 1 db
MRC:
The total opposition (resistive and reactive) presented by the item to an alternating current load.AMNE
Output Impedance Rating:
50.0 ohms
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
Between 100.0 volts and 240.0 volts
MRC:
The number of specified ranges of frequencies or wavelengths operating between two stated limits.ANLC
Frequency Band Quantity:
1
MRC:
Indicates the type of modulation provided.AYYE
Modulation Type:
Am and fm
MRC:
The name of the accessory component assigned by the controlling agency.AZCG
Accessory Component Name:
FRON-TH-AND-LEKI
MRC:
The degree of conformity of a measurement to a standard or true value for which the calibration is rated.BDHW
Calibration Accuracy Rating:
0.000000001 parts/day after 45 days
MRC:
The number of complete cyclic changes,per unit of time,for which the modulation is rated.BHQD
Modulated Frequency Rating:
Between 50.0 kilohertz and 260000.0 kilohertz
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Opt 001, high stability time base; opt 907 front handle kit
