부품 정보
Adhesive-backed silicone foam rubber strips
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Rectangular
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
7.0 shore durometer a
MRC:
The maximum load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.AASH
Min. Tensile Strength (psi):
90 pounds per square inch
MRC:
The condition of the item with respect to the texture of the surface.ADTX
Surface Condition:
Porous inside and outside periphery
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 0.718 inches and 0.796 inches
MRC:
A measurement of the cross section taken at right angles to the length,in distinction from thickness.ADWH
Cross-sectional Width:
0.750 inches
MRC:
The element,compound,or mixture of which the strengthening feature is fabricated.ADZA
Strengthening Feature Material:
Adhesive
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Ozone resistant and sunlight resistant and weather resistant
MRC:
An integral feature of the item which strengthens and/or stiffens the basic material.ADZK
Strengthening Feature:
Backing
MRC:
Indicates the location(s) of the external strengthening feature on the item.ADZL
External Strengthening Feature Location:
One side
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Bpau battery
MRC:
An indication of the rated density of the item.BDNZ
Density Rating:
29.4 pounds per cubic foot
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Temperature range is -100 to +500 degrees f; adhesive is silicone rubber; color is orange-tan; elongation is 150%; compression (25% deflection) is 6-14 psi
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Silicone rubber
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q
