TXT
묘사:
Fluid Filter Element
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
Between 0.646 inches and 0.656 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 0.185 inches and 0.195 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
20.0
MRC:
The direction in which the fluid is passed through the item.ADNK
Flow Direction:
Inside out
MRC:
Indicates the design type of the item.APGF
Design Type:
Nonreusable
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
Between 1.240 inches and 1.290 inches
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
By-pass valve
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Corrugated single filtering media response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Stainless steel filtering medium
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Air
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical w/out container
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
99193-856504-3 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Valve, control flow aircraft
