MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Flat, square or rectangular rib reinforced
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.125 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
19.280 inches
MRC:
A measurement of the smallest dimension of a flange,in distinction from length or width.ABKU
Flange Thickness:
0.050 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the peripheral shape of the item.ABMW
Edge Shape:
Rectangle, four holes
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
15.100 inches
Distance Between Holes Along Length:
11.800 inches
Distance Between Holes Along Width:
16.920 inches
Distance From First Hole Centerline To End Along Length:
0.500 inches
Distance From First Hole Centerline To End Along Width:
0.500 inches
MRC:
The length of a linear break at an angle to the surfaces forming the edge.ADPE
Corner Bevel Length:
0.120 inches
MRC:
A measurement of the smallest dimension of a body,in distinction from length or width.ADPR
Body Thickness:
0.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the shape of the mounting opening.ADQK
Mounting Opening Shape Style:
Unthreaded hole
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Qan/slq-32; w/s: forrestal class cv; spruance class dd (963); arleigh burke class ddg; countermeasure set, an/slq-32; ticonderoga class cg (47); oliver perry class ffg; nimitz class cvn; wasp class lhd; kidd class ddg
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
