부품 번호:
845-6655309item3-2
TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Knurled no. 5
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
0.370 inches
Under Head Length:
3.000 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Tool assembly/disassembly, top loaded ball valve, highnpressure
First End Taper Length:
0.060 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
0.750 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Shoulder below head .31- long; longitudal groove after shoulder; half groove .940 in long and .06 in wide and .06 in deep; medium knurl head; shoulder diameter 0.220; chamfer on head 45x.06; heat treatment annealed
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.500 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-766, cl304, cond a federal specification single material response
