MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.730 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
5.748 inches
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
7.584 inches
MRC:
A measurement of the longest dimension of a bore.ADGE
Bore Length:
3.360 inches
MRC:
A measurement from the top to the bottom of the bevel on the first end.ADGP
First End Chamfer Depth:
0.700 inches
MRC:
A measurement of the longest dimension of the mounting end,in distinction from width.ADHE
Mounting End Length:
0.250 inches
First Packing Chamber Inside Diameter:
6.850 inches
First Packing Chamber Length:
3.370 inches
MRC:
The length of a straight line which passes through the center of the mounting,and terminates at the outside circumference.ADHZ
Mounting Outside Diameter:
6.770 inches
Distance From Outside Edge Of First Packing Chamber To Edge Of Mounting Flange:
3.810 inches
MRC:
The number of packing chambers contained in the item.ADJG
Packing Chamber Quantity:
2
MRC:
The means of attaching the item.AXGY
Mounting Method:
Bolt
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a519 cp 1045, 4140 through 4145 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Oxide film
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Mil-std-171 fn 3.3.1 military standard single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain-single-deep swaged
