부품 정보
Dia at end of pin is 0.060 in. Min, 0.064 in. Maximum for length of 0.035 in.
TXT
묘사:
Headed Grooved Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Square
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.1245 inches and 0.1248 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
Between 0.420 inches and 0.430 inches
Undercut Diameter:
Between 0.060 inches and 0.064 inches
Under Head Length:
0.495 inches
Undercut Width:
Between 0.015 inches and 0.020 inches
Pin Head Diameter:
Between 0.220 inches and 0.230 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches all other surfaces
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.025 inches and 0.035 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams5630 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove
