TXT
묘사:
Extension Helical Spring
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.AARX
Inside Diameter:
0.190 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the end.ABQK
End Style:
Short twisted hook both ends
MRC:
The length of a straight line which passes through the center of the stock,and terminates at the circumference.ACVU
Stock Diameter:
Between 0.053 inches and 0.057 inches
Spring Free Length:
1.000 inches
MRC:
The number of coils included on the item.APCN
Coil Quantity:
12
MRC:
Indicates the design type of the item.APGF
Design Type:
Mainspring
MRC:
The rated load the item is designed to accommodate.ASZD
Load Rating:
Between 15.975 pounds and 19.525 pounds
MRC:
An indication of the coil helix direction.AXLH
Coil Helix Direction:
Right-hand or left-hand
MRC:
The weight,per specific measurement scale,required to deflect the spring.AXLP
Spring Deflection Rate:
Between 69.930 pounds per inch and 85.470 pounds per inch
Spring Free Outside Diameter:
Between 0.292 inches and 0.308 inches
Hook Radius:
0.146 inches both ends and 0.154 inches both ends
MRC:
An indication of the angular relationship of the ends of the item.AXMH
End Angular Relationship:
Ends parallel one to other
Coil To Hook Inside Length:
0.190 inches both ends
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Astm a 313 assn standard single material response or ams 5688 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Qq-p-35 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical
