부품 번호 8353-33

Bearing Unit Housing

가격 및 가용성

이 NSN의 현재 가격 및 가용성에 대해 이 양식을 제출하십시오.
부품 번호:
양:
이메일 주소:
전화:
참조:
회사:
이름:

우리는 귀하의 정보를 누구에게도 공유하거나 판매하지 않습니다.
사생활 | 용어

All major credit cards accepted as well as gov. p-cards

이 제품의 과거 가격은 547.4 and 738.99 USD. 수량, 가용성, 상태, 리드 타임 및 품목 중단 가능성에 따라 최신 견적을 제공할 때까지 가격을 보장할 수 없습니다.

부품 번호
비무장화
수명
UOM
NIIN
부품 번호:
8353-33
비무장화:
No
수명:
N/A
측정 단위:
1 EA
NIIN:
011065389

부품 정보
Furn w/4 mounting holes, 0.193 in min and 0.196 maximum dia; paint all surfaces not marked w/ zinc chromate primer, tt-p-600 green no 34151 per federal std595

NSN
국가 주식 번호:
3130-01-106-5389 3130011065389
TXT
묘사:
Bearing Unit Housing
INC
INC
아이템 이름 코드:
30559
MRC:
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.ABKG
Bolt Circle Diameter:
2.868 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.2510 inches and 0.2580 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 2.1020 inches and 2.1040 inches
MRC:
A measurement of the smallest dimension of a base,in distinction from length or width.ACYB
Base Thickness:
0.3750 inches
MRC:
A measurement of the center to center distance between the mounting holes along the width.ADFX
Center To Center Distance Between Mounting Holes Along Width:
3.3740 inches
MRC:
None.AFWC
Housing Height:
3.2140 inches
MRC:
A measurement taken at right angles to the length of a housing,in distinction from thickness.AFWE
Housing Width:
4.1250 inches
MRC:
A measurement of the longest dimension of the base,in distinction from width.AGNF
Base Length:
1.7800 inches
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Open
MRC:
None.ANKP
Height From Bottom Of Base To Bore Centerline:
1.8700 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy a356.0
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Pillow block, solid
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
00268-eco 77-295 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

{lang[cimilar]} Bearing Unit Housings

« Mounted Bearings {lang[catalog]}
지금 비교»
맑다 | 숨기다