부품 번호:
82d35size12230volt
부품 정보
Hot phosphoric acid treatment before primer coats
TXT
묘사:
Stea Air Circulating Unit Heater
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Ceiling suspended
MRC:
Indicates the heat medium type for which the unit is designed.ABAM
Heat Medium Type:
Hot water or steam
MRC:
Indicates the limit of the maximum pressure for which the item is designed.ABAN
Maximum Pressure Limit:
25.0 pounds per square inch gage
MRC:
The number of heat outlets included on the item.ABAW
Heat Outlet Quantity:
1
MRC:
The direction in which the heat is discharged from the item.ABAX
Heat Delivery Direction:
Horizontal
MRC:
Indicates the type of outlet(s) provided for the discharge of heat.ABAY
Heat Discharge Outlet Type:
Adjustable
MRC:
Indicates the device/s/ provided for the purpose of directing the flow of heat.ABAZ
Heat Directing Device:
Adjustable louver
MRC:
The mechanism used for air circulation.ABBA
Air Circulation Device:
Propeller fan
MRC:
The different speeds at which the item may be operated.ABBB
Speed Adjustments:
Single speed
MRC:
The maximum rated capacity of air flow moved through the item.ABBD
Maximum Air Flow Rate:
500.0 cubic feet per minute
MRC:
Indicates the type of air the item is designed to circulate.ABBE
Circulated Air Type:
Heated
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
22.000 inches
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
A linear measurement from the surface to a specified inner point on an item,in distinction from height.AEJZ
Depth:
27.000 inches
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Electric motor
MRC:
Indicates the type of device which controls the operation of the item.ALYC
Operating Control Type:
Any acceptable
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
0.41
MRC:
Indicates the type of heating element provided.BDXJ
Heating Element Type:
Hot water coil or steam coil
MRC:
The chemical compound or mechanical mixture properties of which the inclosure is fabricated.CQSJ
Inclosure Material:
Steel
MRC:
The rate of heat delivery of the item.CQXD
Heat Delivery Rate:
30000.0 british thermal unit
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
18.750 inches
MRC:
A numeric value which represents a positive whole value without regard to any unit of measure.NMBR
Quantity:
1
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Primer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Tt-p-664 federal specification single treatment response
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
81349-mil-u-17293d/sh/ government specification
