부품 정보
Pilot operated 2-way cartridge valve, normally open
TXT
묘사:
Directional Control Linear Valve
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2a
MRC:
The number of end connections included in the item.ADQZ
End Connection Quantity:
3
MRC:
The rated valve discharge capacity per unit of time.ADSY
Valve Discharge Flow Rate:
5.0 gallons per minute
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Test stand
MRC:
The number of poppets provided.AJMU
Err Default:
Err default
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Automatic
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded external pipe
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
27
MRC:
The maximum pressure at which an item is rated to operate for each type of service with which an item may be used.CQCJ
Maximum Operating Pressure And Media For Which Designed:
5000.0 pounds per square inch oil, hydraulic
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Stainless steel
MRC:
A rating which expresses the degree of heat or cold as applied to the operation,or limitation of operation,for each type of service with which an item may be used.CRWH
Maximum Operating Tempurature And Media For Which Designed:
200.0 degrees fahrenheit oil, hydraulic
MRC:
The number of fl0w patterns provided.CYGY
Flow Pattern Quantity:
2
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
This cartridge valve is furnished in (standard) aluminum housing with 1/4 npt connections to ports 1 and 2; pilot connection 1/8 npt. Housing has 2 mounting holes of 3/4-16 unf. If pilot pressures falls below pressure valve acts as a relief valve. Determine pressure by multiplying possible system pressure by 11, then devide total by 26. When pilot pressure falls below this number valve will function as a pilot operated relief valve. 26: 1 pilot ratio
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Npt
