TXT
묘사:
Dynamic Microphone
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Hand held
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
1.188 inches
MRC:
A measurement of the longest dimension of any object,in distinction from width.ABRY
Length:
4.500 inches
MRC:
The means of attaching the item.ADJH
Mounting Method:
Clip
MRC:
The additional parts supplied with the item which may be required for application.AFHR
Accessory Components:
Connector
MRC:
The minimum and maximum frequencies to which the item will respond,expressed in hertz.AFYW
Frequency Response Range In Hertz:
+300.0 to 4000.0
MRC:
The total opposition /resistive and reactive/ to the flow of alternating current.AFYY
Impedance Rating:
150.0 ohms
MRC:
The rating indicating the ratio of the output voltage or power to the input voltage or power at a specified reference energy level,expressed in decibels.AFZA
Output Sensitivity Rating In Decibels:
-52.0
MRC:
The electrical output rating and sound pressure input rating which are used as a base reference for the measurement of the sensitivity of an item.AFZB
Output Sensitivity Rating Reference:
10 dynes per sq centimeter
MRC:
An indication of whether or not the item requires a specific polarity for connection into the operating circuit.AGAX
Polarity Connection:
Not required
MRC:
Indicates the specific type of sound pickup which determines the performance of the item.AGAY
Sound Pickup Directional Type:
Omnidirectional
MRC:
An indication of whether or not a feature is included to enable the item to cancel undesirable background sounds.AGAZ
Noise Canceling Feature:
Not included
MRC:
An indication of whether or not a support stand is included with the item.AGBA
Support Stand:
Not included
MRC:
An indication of whether or not the item is provided with a self-contained shock mount.AGBC
Shock Mount:
Not provided
MRC:
Indicates the type of electrical connection included on the item.AGBD
Electrical Connection Type:
Integral cable
MRC:
A measurement of the longest dimension of a cable or cord when fully extended.AGBJ
Extended Cable Length:
15.0 feet
MRC:
The number of conductors,shielded and unshielded,which make up the cable.AGBL
Cable Conductor Quantity:
3
MRC:
The number of insulated conductors within the cable that are inclosed in an electrical shield.AGBM
Cable Shielded Conductor Quantity:
1
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-mil-m-11051 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).
