부품 정보
Single row terminal block
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.AAMA
Mounting Hole Diameter:
0.210 inches
MRC:
The maximum voltage the insulating materials of the item will withstand without resulting in disruptive discharge or deterioration,expressed in volts.AAPB
Dielectric Withstanding Voltage In Volts:
600.0
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.AAQL
Body Style:
Barrier type
MRC:
The center to center distance between terminals.ABCT
Center To Center Distance Between Terminals:
0.570 inches
MRC:
The structural characteristic(s) of the board.ABCX
Board Construction:
Solid construction
MRC:
The number of facilities provided on the item for the installation of terminals.ABDB
Terminal Facility Quantity:
8
MRC:
The number of single/unconnected/taper pin feedthru receptacles provided in the terminal board.ABDH
Single Feedthru Receptacle Quantity:
8
Center To Center Distance Between Mounting Facilities Parallel To Length:
5.060 inches
Distance From Left Edge Of Terminal Board To Center Of First Mounting Facility:
0.210 inches
Boardlength:
5.470 inches
Boardheight:
1.160 inches
Board Height Excluding Terminals:
0.720 inches
Base Thickness:
0.410 inches
MRC:
The electrical current rating,expressed in amperes.AMPS
Current Rating In Amps:
30.0
MRC:
Indicates the type and number of facilities by which the item is mounted.AXHR
Mounting Facility Type And Quantity:
2 unthreaded hole
MRC:
Indicates the type of conductor connection facility/ies/ furnished on each end of a feedthru terminal.CQCW
Feedthru Connection End Type:
513 both ends single combination
MRC:
The number of terminals furnished with the item which have conductor connections on each end.CRZR
Feedthru Terminal Quantity:
8 single combination
MRC:
The arrangement of terminal positions on the item.CWLG
Terminal Pattern Arrangement:
Single row
MRC:
The design of the terminal.CWLN
Terminal Design:
Feedthru
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Furnished with 0.164-32 binder head, phil-slot screws; acceptable wire size is no. 12 awg to no. 14 awg
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy terminals
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic phenolic board
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Copper alloy terminals
