부품 번호:
8100-1251-0285ptno146
TXT
묘사:
Nonmetallic Channel Seal
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Open channel
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
12.000 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
14.000 inches
Left Side Flange Height:
0.750 inches
Right Side Flange Height:
0.750 inches
Left Side Flange Thickness:
0.125 inches
Right Side Flange Thickness:
0.125 inches
Web Thickness:
0.125 inches
Left Side Flange Thickness At Web:
0.125 inches
Right Side Flange Thickness At Web:
0.125 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
14 x 12 fixed light assembly
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
45.0 shore durometer a
Left Inside Angle:
90.0 degrees
Left Outside Angle:
90.0 degrees
Right Inside Angle:
90.0 degrees
Right Outside Angle:
90.0 degrees
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the left tip.CTNK
Left Tip Style:
Left lower taper
MRC:
An indication of whether or not the right tip is identical to the left tip.CTNL
Right Tip Relationship With Left Tip:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the right tip.CTPY
Right Tip Style:
Right lower taper
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
56 in extrusion
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-prf-900 military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
