부품 정보
Afour grooves parallel to left end, 0.060 in. Deep, 0.270 in. From end 0.590 in. Wide, 2.250 in. From end 0.160 in. Wide, 4.050 in. From end 0.150 in. Wide, and 4.400 in. From end 0.150 in. Wide
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.151 inches and 0.161 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 5.190 inches and 5.210 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 0.370 inches and 0.390 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
Between 0.180 inches and 0.200 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 4.895 inches and 4.905 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.140 inches and 0.160 inches
Bolt Hole Centerline To Nearest Edge Distance:
Between 0.180 inches and 0.200 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
2
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic phenolic and paper
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-p-3115, type pbe military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular w/square corners