부품 정보
208 v available; swing over cross slide 10.625; infinitely variable speed spindle drive; saddle mounted controls; digital readout; 3.75 in diameter quill w/no. 6 morse taper; speed ranges 3; hp at spindle 12.5; threads 73, 2-84tpi; bed 15.75 in. Wd; cross slide tvl 11.875 in.; compound rest travel 7.50 in.; tailstock center 6mt; tailstock tvl 7.00 in.; feeds per spindle rev 0.0016 - 0.11 in.; magnetic starter w/110 v controls; center distance 60.00 in.; constant surface speed/3 axis dro models; qc tool post; steady rest; follower rest; micro carriage stop; chuckguard; chipguard; taper attachment; 17 and 27 in. Face plate; 10.00 in. 3-jaw chuck; 12.00 in. 4-jaw chuck
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Heavy duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
General
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
1center brush, 2 mt centers, 1 splash guard, coolant system, inch threading dial, wrench set and keys
MRC:
Indicates the design type of the item.APGF
Design Type:
Screw
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
15.000
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Removable block gap
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+20.0/+2000.0
MRC:
A measurement of the rated swing through the open gap.BTWC
Rated Swing Through Open Gap:
28.750 inches
MRC:
A measurement of the actual swing through the open gap.BTWD
Actual Swing Through Open Gap:
28.750 inches
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
5 morse
MRC:
Designates the size of the hollow spindle hole.BTYN
Hollow Spindle Hole Size:
3.000 inches
MRC:
The length of a straight line which passes through the center of the through hole of a spindle,and terminates at the circumference.BTYP
Hole Diameter Through Spindle:
3.000 inches
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0 and 460.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
