부품 정보
Hhas constant surface sped w/dro; comes with a 1/2" - 2 1/2" nose mounted multi-size collet chuck; also has capability to do metric thread change quani type 51 with the thread quanity range of .2 to 14 mm
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The center to center distance.ADQR
Center To Center Distance:
60.000 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Heavy duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
General or toolroom
MRC:
The name and number of parts supplied with the item which may be required for application.AKYD
Accessory Components And Quantity:
1-17 in face plate (17-803); 1-chip guard (18-807); 1-12 in 3-jaw universal chuck (1225324); 1-14 in 4-jaw independent chuck (1414524); 1-ee collet set (3160-52100)
MRC:
Indicates the design type of the item.APGF
Design Type:
Screw
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
15.000
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Removable block gap
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
2
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
3
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+0.0/+2000.0
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
10.620 inches
MRC:
The number of thread changes provided.BTWB
Thread Change Quantity:
73
MRC:
A measurement of the rated swing through the open gap.BTWC
Rated Swing Through Open Gap:
28.740 inches
MRC:
A measurement of the actual swing through the open gap.BTWD
Actual Swing Through Open Gap:
28.740 inches
MRC:
A measurement of the rated swing over the closed gap.BTWF
Rated Swing Over Closed Gap:
18.100 inches
MRC:
A measurement of the actual swing over the closed gap.BTWG
Actual Swing Over Closed Gap:
18.000 inches
MRC:
Indicates the type of headstock drive provided for turning,rotating,or positioning the mechanism.BTWL
Headstock Drive Type:
Direct pulley, back geared
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
6 morse
MRC:
The length of a straight line which passes through the center of the through hole of a spindle,and terminates at the circumference.BTYP
Hole Diameter Through Spindle:
3.000 inches
MRC:
The number of carriages provided.BTYQ
Carriage Quantity:
1
MRC:
The means used to operate the carriage longitudinal feed.BTYR
Carriage Longitudinal Feed Operation Method:
Hand or power
MRC:
The means used to operate the carriage cross feed.BTYS
Carriage Cross Feed Operation Method:
Hand or power
MRC:
Indicates the type of gear change provided.BTYW
Gear Change Type:
Quick
MRC:
The minimum and maximum number of threads provided on the item.BTZR
Thread Quantity Range:
+2.0/+84.0 per inch
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
