MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2b rod connection
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand rod connection
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 1.500 inches and 1.501 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
Between 2.980 inches and 2.990 inches
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
2.375 inches
Distance From Pivot Pinhole Center To Rod Connection End:
3.625 inches
Fork Arm Thickness:
0.812 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
1.620 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
8 rod connection
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.750 inches rod connection
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.375 inches securing pin hole
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-s-21952, hy 80 military specification single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unc securing pin hole
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf rod connection
