부품 번호:
803-5001003-x3xx-57
부품 정보
Undercut between first and second step 0.047 inch min 0.078 inch maximum width 0.141 inch min 0.172 inch maximum diameter
TXT
묘사:
Headed Shoulder Pin
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Double chamfer
Under Head Length:
Between 1.797 inches and 1.827 inches
First Step Diameter:
Between 0.485 inches and 0.515 inches
First Step Length:
0.062 inches
Second Step Diameter:
Between 0.183 inches and 0.185 inches
Second Step Length:
Between 1.672 inches and 1.703 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled through center
First Hole Diameter:
Between 0.062 inches and 0.078 inches
First End Taper Length:
0.047 inches
First End Taper Angle:
45.0 degrees
Pin Head Diameter:
Between 0.735 inches and 0.765 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
Between 0.110 inches and 0.140 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 304
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-s-763 cond a federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
