부품 번호:
803-2177934-rev.c-3xx-18
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3a single threaded portion
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Err Default:
0.222 inches single threaded portion
MRC:
The length of a straight line which passes through the center of a flange,and terminates at the circumference.ABKK
Flange Diameter:
0.937 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
0.471 inches
Flange Seat To Disk End Height:
0.122 inches
Under Flange Height:
0.316 inches
MRC:
The angle of the end surface upon which the mated surface seats,expressed in degrees.AJSG
Seat Angle In Deg:
15.000
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24 single threaded portion
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.766 inches single threaded portion
MRC:
The physical configuration of the surface of the seat.CQKM
Seating Surface Shape:
Angular
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Qq-n-281 class a federal specification single material response or qq-n-281 class b federal specification single material response or qq-n-288 comp a federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Threaded flanged
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Uns single threaded portion
