부품 정보
Template c h-53 sensor orientation
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.970 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.600 inches
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
0.060 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Consol gse
MRC:
A measurement from the bottom to the top of the figure.ANQT
Figure Height:
Between 0.08 inches and 0.12 inches
MRC:
The means by which the letter(s) is formed.BCNH
Letter Forming Method:
Engraved
MRC:
The design of the character on the item.BCNJ
Character Design:
Lettering and numbering
MRC:
An indication of whether or not a punctuation mark(s) is included.BCNL
Punctuation Mark:
Not included
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Material = cast acrylic per sae ams-l-p-391 item a, type 1, grade c, color shall be red, color number = 11105 per fed-std-595
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic
MRC:
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.SPCL
Special Test Features:
Part shall have helicopter nomenclature, template letter and p/n marked in locations i/a/w sae as478-38. Fill engraved characters with white epoxy base ink per ass56032-lwht
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Letters and numbers shall be .08" high arial font, .010 depth, and 0.125" high arial font, .010 depth
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
05047-asme y14.100-2000 professional/industrial association standard