부품 정보
Replacement for p/n 8014cs2 nsn 3416-01-348-9944.Bedway width 12.5"; swing in gap 21"; center height over bed 6.7"; travel of cross slide 9.8"; travel of top slide 9.8"; trailstock quill travel 5.7" and quill diameter 2.8"
MRC:
Indicates the type of mount utilized to support the item.AAXX
Mounting Type:
Floor
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The center to center distance.ADQR
Center To Center Distance:
25.000 inches
MRC:
Indicates the performance capability of the item or component.AGLD
Performance Type:
Heavy duty
MRC:
The purpose for which the item is designed.AKSL
Purpose For Which Designed:
Toolroom
MRC:
Indicates the design type of the item.APGF
Design Type:
Screw
MRC:
The rated horsepower of the electric motor.ASHK
Electric Motor Horsepower Rating:
10.000
MRC:
Indicates the type of bed provided.AWHA
Bed Type:
Permanent gap
MRC:
The number of electric motors provided.AWLX
Electric Motor Quantity:
1
MRC:
The number of spindle speeds provided.BTSZ
Spindle Speed Quantity:
3
MRC:
The minimum to maximum speed limits of the spindle,expressed in revolutions per minute.BTTB
Spindle Speed Range In Rpm:
+0.0/+3250.0
MRC:
A measurement of the rated swing of the item.BTTD
Rated Swing:
13.000 inches
MRC:
A measurement of the actual swing over the bed of the item.BTTF
Actual Swing Over Bed:
13.750 inches
MRC:
A measurement of the swing over the cross slide of the item.BTTG
Swing Over Cross Slide:
7.750 inches
MRC:
The number of thread changes provided.BTWB
Thread Change Quantity:
56
MRC:
Indicates the type of headstock drive provided for turning,rotating,or positioning the mechanism.BTWL
Headstock Drive Type:
Step cone pulley
MRC:
The industrial designation or term used to define the headstock center taper size.BTWM
Headstock Center Taper Size Designator:
3 morse
MRC:
The length of a straight line which passes through the center of the through hole of a spindle,and terminates at the circumference.BTYP
Hole Diameter Through Spindle:
1.650 inches
MRC:
The number of carriages provided.BTYQ
Carriage Quantity:
1
MRC:
The means used to operate the carriage longitudinal feed.BTYR
Carriage Longitudinal Feed Operation Method:
Power
MRC:
The means used to operate the carriage cross feed.BTYS
Carriage Cross Feed Operation Method:
Power
MRC:
Indicates the type of gear change provided.BTYW
Gear Change Type:
Plain
MRC:
The minimum and maximum number of threads provided on the item.BTZR
Thread Quantity Range:
+2.0/+56.0 per inch
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
230.0 and 460.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
