부품 정보
Countersunk two inside holes 82 degrees to 0.279 in. Dia
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.750 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.750 inches 3.750 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.125 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.125 inches 0.125 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.500 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.500 inches 1.500 inches
First Hole Diameter:
0.166 inches
First Hole Diameter:
0.166 inches 0.166 inches
Second Hole Diameter:
0.166 inches
Second Hole Diameter:
0.166 inches 0.166 inches
MRC:
The maximum potential gradient that the insulating material can withstand per mil /0.001 inch/ thickness without rupture.ACGY
Dielectric Material Voltage Rating Per Mil Thickness In Volts:
Not rated
Third Hole Diameter:
0.166 inches
Third Hole Diameter:
0.166 inches 0.166 inches
Fourth Hole Diameter:
0.166 inches
Fourth Hole Spacing:
2.078 inches
First Hole Spacing:
0.312 inches
Second Hole Spacing:
0.750 inches
Third Hole Spacing:
0.531 inches
Fifth Hole Spacing:
0.531 inches
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.MTLC
Material And Location:
plastic, laminated, thermosetting, l-p-00513, type pbe err-100 err-100
MRC:
The element,compound,or mixture of which the item is fabricated,excluding any surface treatment,and its location.MTLC
Material And Location:
plastic, laminated, thermosetting, l-p-00513, type pbe
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Flat, rectangular