TXT
묘사:
Protection Bellows
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.031 inches
MRC:
The length of a straight line which passes through the center of the large end,and terminates at the outside circumference.AHMG
Large End Outside Diameter:
1.250 inches
MRC:
The length of a straight line which passes through the center of the small end,and terminates at the outside circumference.AHMH
Small End Outside Diameter:
0.562 inches
MRC:
A measurement of the longest dimension of an item when it is in an extended position,in distinction from width.ATEM
Extended Length:
5.000 inches
MRC:
A measurement of the longest dimension of an item when it is in a contracted /compressed/ position,in distinction from width.ATEN
Contracted Length:
2.688 inches
MRC:
A numeric value that reflects the durometer scale hardness rating of a nonmetallic item.BMJT
Durometer Hardness Rating:
Between 60.0 and 70.0
MRC:
The length of a straight line which passes through the center of the large end,and terminates at the inside circumference.CDDB
Large End Inside Diameter:
1.188 inches
MRC:
The length of a straight line which passes through the center of the small end,and terminates at the inside circumference.CDDD
Small End Inside Diameter:
0.500 inches
MRC:
An outside measurement of the longest dimension of the small end,in distinction from width.CPYF
Small End Outside Length:
0.344 inches
MRC:
A measurement of the longest inside dimension of the large end,in distinction from width.CPYM
Large End Inside Length:
0.438 inches
MRC:
A measurement of the longest dimension of an item when it is in a neutral position.CPYN
Neutral Length:
2.688 inches
MRC:
A measurement of the longest outside dimension of the large end,in distinction from width.CPYS
Large End Outside Length:
0.438 inches
MRC:
A measurement of the longest inside dimension of the small end,in distinction from width.CPYT
Small End Inside Length:
0.344 inches
MRC:
A measurement of the smallest dimension between the ends of the item,in distinction from length or width.CPYW
Thickness Between Ends:
0.031 inches
MRC:
A measurement of the smallest dimension of both ends of the item,in distinction from length or width.CPYX
Thickness At Both Ends:
0.062 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic