부품 번호:
801-6640811assy260
부품 정보
Cascade orificial resistive device
TXT
묘사:
Fluid Flow Restrictor Unit
MRC:
The basic material of which the body is fabricated.AAFZ
Body Material:
Copper and nickel
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
72.000 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
22.960 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Ship
MRC:
Indicates the design type of the item.APGF
Design Type:
Straight
MRC:
Indicates the type of end connection.AWZY
End Connection Type:
Threaded female
MRC:
An indication of whether or not the end connections are identical.AXAL
End Connection Similarity:
Not identical
MRC:
The pressure at which an item is designed to operate.BGST
Pressure Rating:
700.0 pounds per square inch
MRC:
Indicates the type and number of strainers provided.BZTM
Strainer Type And Quantity:
Perforated plates, 68 inner, 66 outer; cartridge module assembly
MRC:
Designates the size of the valve.CCFG
Valve Size:
3.000 inches
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The amount of flow per unit of measure and the fluid type for which the item is designed.CWRR
Flow Rate And Fluid Type:
365.0 gallons per minute water
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Military critical, export control; 12 inch flanged body with 3 inch nps outlet and two 3 nps inlets
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
801-6640811 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
