MRC:
The ability of an item to withstand a specified torque load without fracture.AAPL
Torque Load Rating:
7.50 inch-ounces
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.625 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.531 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
1.844 inches
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Three 0.157 in. Diameter mtg holes forming an isosceles triangle base 1-1/8 in., altitude 2-5/32 in.
MRC:
The basic structure of the item.ALXF
Structural Design:
Sectional
MRC:
The value/s/ of direct current potential which must be applied to the item for operation,expressed in volts.APBR
Dc Operating Voltage Rating In Volts:
28.000
MRC:
The specific number of contact terminals included.APNG
Contact Terminal Quantity:
21
MRC:
The specific number of coil terminals included.APNH
Coil Terminal Quantity:
3
MRC:
An indication of whether or not the reset facilities are provided.APNR
Reset Facility Feature:
Provided
MRC:
The amount of current required to activate the item.AXAZ
Pull-in Current:
3.700 amperes
MRC:
The amount of current required to maintain operation of the item.AXBA
Hold-in Current:
150.000 milliamperes
MRC:
The direction of rotation for which the item is designed.AYSY
Rotation Direction For Which Designed:
Clockwise
MRC:
The number of sections included.BWGP
Section Quantity:
2
MRC:
The designation that identifies the schematic diagram of the contact configuration.CPWK
Contact Arrangement:
8 pdt
MRC:
The number of coil winding(s) provided.CPWL
Coil Winding Quantity:
1
MRC:
An indication of the characteristic(s) of a winding.CPWM
Winding Characteristic:
Single wound tapped
MRC:
The amount of direct current resistance required to activate the coil pull-in.CPWP
Coil Pull-in Dc Resistance Rating:
7.500 ohms
MRC:
The amount of direct current resistance required to maintain operation of the coil hold-in.CPWQ
Coil Hold-in Dc Resistance Rating:
260.000 ohms
MRC:
The measurement of the shaft rotation,expressed in degrees.CPWT
Shaft Rotation In Deg:
30.000
