TXT
묘사:
Packing With Retainer
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
0.322 inches
MRC:
A measurement of the smallest dimension of the retainer,in distinction from length or width.ADTJ
Retainer Thickness:
0.029 inches
MRC:
The length of a straight line which passes through the center of the packing ring in cross section,and terminates at the circumference.ADTK
Packing Ring Cross-sectional Diameter:
0.040 inches
MRC:
The length of a straight line which passes through the center of a retainer,and terminates at the inside circumference.AFFW
Retainer Inside Diameter:
0.187 inches
MRC:
The length of a straight line which passes through the center of the packing,and terminates at the inside circumference.AFFX
Packing Inside Diameter:
0.114 inches
MRC:
The structural characteristic of the item.CQCF
Construction:
Two-piece
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber butadiene-acrylonitrile class nbr packing or rubber chloroprene class cr packing or rubber butadiene-styrene class sbr packing
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 302 retainer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi assn standard single material response retainer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Mil-r-6855, cl 1 military specification 1st material response or mil-r-6855, cl 2 military specification 2nd material response or mil-r-6855, cl 3 military specification 3rd material response
